- Home /
- PlayStation 3 (PHAT) /
- Reflow Reball Equipment /
- Warton Solrist 100 Solder Spot Resist
You have no items in your shopping cart.
Warton Solrist 100 Solder Spot Resist is a temporary solder resist designed to be applied on areas of printed circuit assemblies which require components to be added after wave soldering. A thin layer of Solrist is applied over holes and easily removed after drying through the soldering process. Solrist is non staining and is available in viscosity’s suitable for both manual and automated dispensing.
Solrist Process
The following process chart shows the order in which Solrist Solder Spot Resist should be applied.
Step 1 PCB
Step 2 Apply Solrist Solder Spot Resist
Step 3 Apply Liquid Flux
Step 4 Preheat
Step 5 Solder with Warton High Purity Bar Solder
Step 6 Peel Off Solrist coating
Step 7 Touch up and add missing components with Warton High Purity Cored Solder
Product Recommendation
You can recommend the product to your friends. Input their email below, we will send emails to them on your behalf.
There are no products matching the selection.
Product Tags
Use spaces to separate tags. Use single quotes (') for phrases.