Welcome to Game Console Repairs

Contact Us

Xecuter DGX v1.1S

Be the first to review this product

Availability: In stock

$33.95

Quick Overview

After the phenomenal success of our DGX product, we listened to a great deal of feedback from our loyal userbase and have implimented some changes to the design to make the DGX perform even better than before – especially for Trinity boards.


DGX V1.1S change log:



  • Added 70cm 24WG POST_OUT Wire

  • Added a ceramic cap option (Point C29) between D and GND (same as CR3 Pro) – included an optional 10pf ceramic cap

  • Added a selectable 5ohm and 10ohm resistor to post_out (simple solder jumpers 1 Closed: 10ohm, 2 Closed: 5ohm, 3 Closed: 0ohm Default)

  • Added a a grounded IPEX socket (Point J1) for CPU_RST (10cm IPEX cable included)

  • Larger solder pads and stronger vias (C D E F 5v GND)

  • Removed JTAG pin header (Programming is not required – some users tried to program their DGX and damaged it)

  • Optimized code for enhanced Trinity performance. DGX 1.1 would boot the worst Trinity we had in 30 seconds (v1.0 booted in 2 minutes)

  • My preferred settings for Trinity were: D: 10cm IPEX to R4D4, C: 70cm 24AWG Wire , 10pf Cap Installed, 0ohm (Default)

  • My preferred settings for Corona were: D: 10cm IPEX to C5R11, C: Default wire, No Cap Installed, 10ohm


 

Warranty : 3 Months Warranty

Xecuter DGX v1.1S

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

After the phenomenal success of our DGX product, we listened to a great deal of feedback from our loyal userbase and have implimented some changes to the design to make the DGX perform even better than before – especially for Trinity boards.

DGX V1.1S change log:

  • Added 70cm 24WG POST_OUT Wire
  • Added a ceramic cap option (Point C29) between D and GND (same as CR3 Pro) – included an optional 10pf ceramic cap
  • Added a selectable 5ohm and 10ohm resistor to post_out (simple solder jumpers 1 Closed: 10ohm, 2 Closed: 5ohm, 3 Closed: 0ohm Default)
  • Added a a grounded IPEX socket (Point J1) for CPU_RST (10cm IPEX cable included)
  • Larger solder pads and stronger vias (C D E F 5v GND)
  • Removed JTAG pin header (Programming is not required – some users tried to program their DGX and damaged it)
  • Optimized code for enhanced Trinity performance. DGX 1.1 would boot the worst Trinity we had in 30 seconds (v1.0 booted in 2 minutes)
  • My preferred settings for Trinity were: D: 10cm IPEX to R4D4, C: 70cm 24AWG Wire , 10pf Cap Installed, 0ohm (Default)
  • My preferred settings for Corona were: D: 10cm IPEX to C5R11, C: Default wire, No Cap Installed, 10ohm

 

Product Recommendation

You can recommend the product to your friends. Input their email below, we will send emails to them on your behalf.

For detailed specifications please follow the link below:-

http://team-xecuter.com/forums/showthread.php?t=97032

Questions & Answers  

Ask a question about this product

* Required Fields

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.